Friday, October 31, 2008

IPaddress blocking in HTTPD for FC8

In FC8 system comment the code for following line
"check for the host is not IP address" in both the files
1. /etc/httpd/modsecurity.d/blocking/modsecurity_crs_21_protocol_anomolies.conf
2. /etc/httpd/modsecurity.d/modsecurity_crs_21_protocol_anomolies.conf

This will disable the bolcking of IP Address in browsing to view the php pages.

Tuesday, April 1, 2008

Postgresql Installation Error


Installation Error for postgresql 8.1.0
Error Message : Failed to get system.metric service terminal : 87

This error can occur when the windows doesn't support the old postgresql version
please try to install the lastest postgresql version


postgresql 8.3.0 commands

cmd to take database dump
#pg_dump -U postgres -c -f dbdump_name.sql dbname


cmd to load the dump
# psql -U postgres -d dbname -f dbdump_name.sql

Thursday, March 27, 2008

IPtables For Outlook Express Mails

A Squid proxy can share a Internet Service. But it will not download the mails in Outlook Express.
In this case IPtables can be used to retrieve mails.

A model Network setup:

Eth0 : Public N/W

Eth1 : Private N/W
IP Range : 192.168.10.0/24

So hence the Iptables rules for forwarding the packets ,

# iptables --table nat --append POSTROUTING -s 192.168.10.0/24 --out-interface eth1 -j MASQUERADE

# iptables --append FORWARD -s 192.168.10.0/24 --in-interface eth0 -j ACCEPT

# iptables -A INPUT -s 192.168.10.0/24 -j ACCEPT

Insert the above rules,
Save and restart the service

#service iptables save
# service iptables restart
Now you can download your mails in the Outlook express.

Client Side Configuration:
1. Set the Gateway address as Eth1 IP.
2. Open Outlook Express – Tools – Accounts – mail – add new
3. Configure your mail account.

Tuesday, February 5, 2008

SELinux configuring for php postgresql connection in Linux

Configuring SELinux

The following command will disbale the SELinux. This will allow php to connect with the postgresql database.
Run the following command in the terminal

/usr/sbin/setsebool -P httpd_disable_trans 1

/sbin/service httpd restart

Wednesday, January 30, 2008

Npgsql is a .Net Data Provider for the PostgreSQL Database Server

Npgsql is a .Net Data Provider for the PostgreSQL Database Server.

It allows a .Net client application (Console, WinForms, ASP.NET, Web Services...) to send and receive data with a PostgreSQL server.

2. How to get and compile Npgsql

2.1 Binary package

You can download Npgsql compiled for MS.Net and Mono in the Files section of the project.

Inside this package, you will find the following directory layout:

Npgsql/bin/docs - Documentation

Npgsql/bin/docs/apidocs - API Documentation

Npgsql/bin/ms1.1 - Npgsql compiled for MS.Net 1.1

Npgsql/bin/mono - Npgsql compiled for Mono

As soon as Npgsql is released on other platforms/versions, they will be added accordingly to this layout.

2.2 Installing binary package

In order for the .Net Runtime to locate the Npgsql.dll library, this file must be placed in your application directory- unless you specify another directory as a path to private components through a configuration file (using the probing element). Please see the .Net docs for information on how the runtime probes (locates) assemblies to be loaded. Specifically, see the section called "Path to Private Components"

In ASP.NET and Web Services .Net Applications, there must be a directory called "bin" below the ASP.NET root application directory. For example, if the application directory is called "ASPNETApplication", then Npgsql.dll and Mono.Security.dll must be placed in the "ASPNETApplication\bin" directory. If these files are not in the right directory, you can expect to see the compiler generate errors on code that uses Npgsql classes.

Alternatively, you can put the Npgsql assembly in the Global Assembly Cache (GAC). Since version 0.4, Npgsql is strongly signed- meaning that you can use "gacutil" to install it. Simply issue the following command:

gacutil -i Npgsql.dll

Please refer to "Installing an Assembly in the Global Cache Assembly" section of MSDN docs for more information. Use of the GAC has implications that you should fully understand before going down this path.

Note that placing Npgsql in the GAC is required for Npgsql design time support in Visual Studio .Net.

(Npgsql compiled for Mono doesn't require Mono.Security.dll as it's already integrated in the Mono Runtime.)

Once you copy or set up the assemblies, you're ready to try the examples- jump to section 3.

2.3 Getting Npgsql from CVS

To get Npgsql from CVS, use the following info in your CVS client:

Server: cvs.pgfoundry.org
Repository: /cvsroot/npgsql
Module name: Npgsql
User: anonymous
Password:

If you are using CVS from a command line, use this command:

cvs -d :pserver:anonymous@cvs.pgfoundry.org:/cvsroot/npgsql login

Hit the Enter key when prompted for a password (none required):
cvs -d :pserver:anonymous@cvs.pgfoundry.org:/cvsroot/npgsql checkout Npgsql

The code will begin transferring:

$ cvs -d :pserver:anonymous@cvs.pgfoundry.org:/cvsroot/npgsql login
Logging in to :pserver:anonymous@cvs.pgfoundry.org:2401/cvsroot/npgsql
CVS password:
$ cvs -d :pserver:anonymous@cvs.pgfoundry.org:/cvsroot/npgsql co Npgsql
cvs checkout: Updating Npgsql
cvs checkout: Updating Npgsql/admin
U Npgsql/admin/release.pl
cvs checkout: Updating Npgsql/docs
U Npgsql/docs/Npgsql.zargo
U Npgsql/docs/NpgsqlConnectionStateMachine.png
U Npgsql/docs/SuggestedReadings.htm
...

2.4 Compiling Npgsql

The officially supported method for compiling Npgsql is NAnt.

Simply run nant from the Npgsql/src/Npgsql folder and you're done. It will create a folder named "build"; see the "build/ms" folder for the resulting assemblies.

To run nUnit tests, simply run nant tests. Note that first you need to prepare the database for testing by executing "add_* scripts" in the Npgsql/src/testsuite/noninteractive folder.

We will provide solution projects for other development platforms such as Visual Studio .Net, SharpDevelop, and MonoDevelop. (We have already received reports of successful solution projects created for these other environments and will make them available soon.)

3. Npgsql Usage

This section explains Npgsql usage in a .Net application (Windows or ASP.NET). If you have experience developing data access applications using the Sql Server, OleDB or ODBC.NET providers, you will find that Npgsql is very similar, in most respects equally or more robust, and backed by an active community.

In order to use Npgsql, the PostgreSQL server must be listening to TCP/IP connections. TCP connections are enabled by default on 8.0 + servers. Previous versions should have postmaster started with the "-i" option. Check PostgreSQL Documentation for details: http://www.postgresql.org/docs/7.4/static/postmaster-start.html

Note: Npgsql is still under development. Only features currently supported will be demonstrated. As Npgsql matures, more functionality will become available.

Adding required namespaces to your source file

First, in order to access Npgsql objects more easily (i.e. Intellisense in Visual Studio .Net), you need to instruct the compiler to use the Npgsql namespace. As you manipulate data retrieved by Npgsql, classes in System.Data will also be required. In C#, add this directive to the appropriate page or class:

using System.Data;
using Npgsql;

If you are using ASP.NET without code-behind files, you may need to add the following lines in top of your ASPX pages:

<%@ Assembly name="System.Data" %>
<%@ Assembly name="Npgsql" %>
You can read more details here FAQ Mono Page about ASP.NET

Establishing a connection

To establish a connection to a server located at IP 127.0.0.1, port 5432, as user "joe", with password "secret", on database "joedata", open NpgsqlConnection with the following connection string:

using System;
using System.Data;
using Npgsql;

public class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();
conn.Close();
}
}

Connection String parameters

When establishing a connection, NpgsqlConnection accepts many parameters which modify its behavior. Here is the list of current parameters you can tweak: (From NpgsqlConnection source)

 Gets or sets the string used to connect to a PostgreSQL database.
/// Valid values are:
/// Server: Address/Name of PostgreSQL Server;
/// Port: Port to connect to;
/// Protocol: Protocol version to use, instead of automatic; Integer 2 or 3;
/// Database: Database name. Defaults to user name if not specified;
/// User Id: User name;
/// Password: Password for clear text authentication;
/// SSL: True or False. Controls whether to attempt a secure connection. Default = False;
/// Pooling: True or False. Controls whether connection pooling is used. Default = True;
/// MinPoolSize: Min size of connection pool. Default: 1;
/// MaxPoolSize: Max size of connection pool. Default: 20;
/// Encoding: Encoding to be used; Can be ASCII or UNICODE. Default is ASCII. Use UNICODE if you are having problems with accents.
/// Timeout: Time to wait for connection open in seconds. Default is 15.
/// CommandTimeout: Time to wait for command to finish execution before throw an exception. In seconds. Default is 20.
/// Sslmode: Mode for ssl connection control.
/// ConnectionLifeTime: Time to wait before closing unused connections in the pool, in seconds. Default is 15.
/// SyncNotification: Specifies if Npgsql should use synchronous notifications
Encoding can be ASCII or UNICODE. If your application uses characters with accents and it doesn't work with the default settings, try changing it.
Min pool size, when specified, will make NpgsqlConnection pre-allocate the specified number of connections with the server.
Sslmode can be one of the following values:
Prefer - If it is possible to connect via SLL, SSL will be used.
Require - If an SSL connection cannot be established, an exception is thrown.
Allow - Not supported yet; connects without SSL.
Disable - No SSL connection is attempted.
The default value is "Disable".

Using NpgsqlCommand to add a row in a table

The previous example doesn't do anything useful. It merely connects to the database and disconnects. If there is an error, a NpgsqlException is thrown. Now, suppose you have a table called "table1" with two fields, "fielda" and "fieldb", both of type int. If you want to insert tuple (1, 1) in this table you can send the insert statement:

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("insert into table1 values(1, 1)", conn);
Int32 rowsaffected;

try
{
rowsaffected = command.ExecuteNonQuery();

Console.WriteLine("It was added {0} lines in table table1", rowsaffected);
}

finally
{
conn.Close();
}
}
}
ExecuteNonQuery() is ideally suited for insert and update queries because it returns an integer indicating the number of rows affected by the last operation.

Getting a single result value using the NpgsqlCommand.ExecuteScalar() method

In some scenarios, you only need to retrieve a single value (scalar) from a function. Use the ExecuteScalar() method on a Command object :

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("select version()", conn);
String serverversion;

try
{
serverversion = (String)command.ExecuteScalar();
Console.WriteLine("PostgreSQL server version: {0}", serverversion);
}


finally
{
conn.Close();
}
}
}
You may also use ExecuteScalar against queries that return a recordset, such as "select count(*) from table1". However, when calling a function that returns a set of one or more records, only the first column of the first row is returned (DataSet.Tables[0].Rows[0][0]). In general, any query that returns a single value should be called with Command.ExecuteScalar.

Getting a full result set with NpgsqlCommand.ExecuteReader() method and NpgsqlDataReader

There are several ways to return recordsets with Npgsql. When you'd like to pass a SQL statement as command text and access the results with a memory-efficent DataReader, use the ExecuteReader() method of the NpgsqlCommand object:

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("select * from tablea", conn);


try
{
NpgsqlDataReader dr = command.ExecuteReader();
while(dr.Read())
{
for (i = 0; i < dr.FieldCount; i++)
{
Console.Write("{0} \t", dr[i]);
}
Console.WriteLine();
}

}

finally
{
conn.Close();
}
}
}
Note that you can 'daily chain' select statements in a command object's commandtext to retrieve more than one record set: "select * from tablea; select * from tableb"

Warning: There is a known issue when calling ExecuteReader and large tables. Currently Npgsql gets all data from table before returning. If you are experiencing bad performance in such cases, you may need to use a server cursor to page through rows. For that, you can use a code like the following:

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("declare te cursor for select * from tablea;", _conn);

command.ExecuteNonQuery();

command.CommandText = "fetch forward 3 in te;";

NpgsqlDataReader dr = command.ExecuteReader();


while (dr.Read())
{
//work with your data here.
}

dr.Close();


// get more three rows.

dr = command.ExecuteReader();

while (dr.Read())
{
//work with your data here.
}

dr.Close();

}
}

We are working to do this automatically in the next version.

Using parameters in a query

Parameters let you dynamcially insert values into SQL queries at run-time. Generally speaking, parameter binding is the best way to build dynamic SQL statements in your client code. Other approaches, such as basic string concatenation, are less robust and can be vulerable to SQL injection attacks. To add parameters to your SQL query string, prefix the paramter name with ":". The example below uses a parameter named value1 (see ":value1").

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

// Declare the parameter in the query string
NpgsqlCommand command = new NpgsqlCommand("select * from tablea where column1 = :value1", conn);

// Now add the parameter to the parameter collection of the command specifying its type.
command.Parameters.Add(new NpgsqlParameter("value1", DbType.Int32));

// Now, add a value to it and later execute the command as usual.
command.Parameters[0].Value = 4;


try
{
NpgsqlDataReader dr = command.ExecuteReader();
while(dr.Read())
{
for (i = 0; i < dr.FieldCount; i++)
{
Console.Write("{0} \t", dr[i]);
}
Console.WriteLine();
}

}

finally
{
conn.Close();
}
}
}
You can also send a parameterized query to the server using NpgsqlParamenter and NpgsqlParamenterCollection objects.) This code assumes a table called "tablea" with at least one column named "column1" of type int4.

Using prepared statements

The Prepare method lets you optimize the performance of frequently used queries. Prepare() basically "caches" the query plan so that it's used in subsequent calls. (Note that this feature is only available in server 7.3+ versions. If you call it in a server which doesn't support it, Npgsql will silently ignore it.) Simply call the Prepare() method of the NpgsqlCommand before query execution:

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

// Declare the parameter in the query string
NpgsqlCommand command = new NpgsqlCommand("select * from tablea where column1 = :column1", conn);

// Now add the parameter to the parameter collection of the command specifying its type.
command.Parameters.Add(new NpgsqlParameter("column1", DbType.Int32);

// Now, prepare the statement.
command.Prepare();

// Now, add a value to it and later execute the command as usual.
command.Parameters[0].Value = 4;


try
{
NpgsqlDataReader dr = command.ExecuteReader();
while(dr.Read())
{
for (i = 0; i < dr.FieldCount; i++)
{
Console.Write("{0} \t", dr[i]);
}
Console.WriteLine();
}

}

finally
{
conn.Close();
}
}
}
This code assumes a table called "tablea" with at least one column named "column1" of type int4.

Function calling

To call a function, set the CommandType property of the NpgsqlCommand object to CommandType.StoredProcedure and pass the name of the function you want to call as the query string (CommandText property).

using System;
using System.Data;
using Npgsql;


// This example uses a function called funcC() with the following definition:
// create function funcC() returns int8 as '
// select count(*) from tablea;
// ' language 'sql';

// Note that the return type of select count(*) changed from int4 to int8 in 7.3+ versions. To use this function
// in a 7.2 server, change the return type from int8 to int4.

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();


try
{
NpgsqlCommand command = new NpgsqlCommand("funcC", conn);
command.CommandType = CommandType.StoredProcedure;

Object result = command.ExecuteScalar();

Console.WriteLine(result);
}

finally
{
conn.Close();
}
}
}

Adding parameters to a PostgreSQL function is similar to our previous examples. However, when specifying the CommandText string, you can exclude parameter names. Use only the function name:

using System;
using System.Data;
using Npgsql;


// This example uses a function called funcC with the following definition:
// create function funcC(int4) returns int8 as '
// select count(*) from tablea where field_int4 = $1;
// ' language 'sql';

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();


try
{
NpgsqlCommand command = new NpgsqlCommand("funcC", conn);
command.CommandType = CommandType.StoredProcedure;

command.Parameters.Add(new NpgsqlParameter());

command.Parameters[0].DbType = DbType.Int32;
command.Parameters[0].Value = 4;

Object result = command.ExecuteScalar();

Console.WriteLine(result);


}

finally
{
conn.Close();
}
}
}

This code assumes a table called "tablea" with at least one field called "field_int4" of type int4.

Getting full results in a DataSet object: Using refcursors

Refcursors are one of the most powerful ways to build functions in Postgres that return large result sets to the client. Using refcursors, a single function can return the results of multiple queries to the client in a single round-trip. Most Npgsql developers will learn that refcursors are quite easy to use once you grasp the basic syntax.

This sample returns two result sets from a function using refcursors. With Npgsql's solid refcursor support, you can get many result sets without having to worry about the internal workings of the refcursor in Postgres.

Consider the following refcursor-based function:
CREATE OR REPLACE FUNCTION testrefcursor(int4) RETURNS SETOF refcursor AS

'DECLARE
ref1 refcursor;
ref2 refcursor;
ref3 refcursor;
BEGIN

OPEN ref1 FOR
SELECT * FROM table1;
RETURN NEXT ref1;

OPEN ref2 FOR
SELECT * FROM table2;
RETURN next ref2;

OPEN ref3 FOR EXECUTE
'SELECT * FROM table3 WHERE keyfield = ' || $1;
RETURN next ref3;

RETURN;
END;'
LANGUAGE plpgsql;

This function returns the full results of three select statements. Notice that the last select statement is dynamically created on the server.

Now, to call these function and retrieve the data using a DataReader, you should use the following code:

using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;

public class c
{
public static void Main(String[] args)
{

NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Initial Catalog=eeeeee;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlTransaction t = conn.BeginTransaction();
NpgsqlCommand command = new NpgsqlCommand("testrefcursor", conn);
command.CommandType = CommandType.StoredProcedure;

NpgsqlDataReader dr = command.ExecuteReader();

while(dr.Read())
{

Console.WriteLine(dr.GetValue(0));
}

dr.NextResult();

while(dr.Read())
{

Console.WriteLine(dr.GetValue(0));
}
dr.Close();
t.Commit();
conn.Close();
}
}

Alternatively, you can retrieve the results into a DataSet object:
using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;

public class c
{
public static void Main(String[] args)
{
DataSet myDS;
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Initial Catalog=eeeeee;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlTransaction t = conn.BeginTransaction();
NpgsqlCommand command = new NpgsqlCommand("testrefcursor", conn);
command.CommandType = CommandType.StoredProcedure;

con.Open();
NpgsqlDataAdapter da = new NpgsqlDataAdapter(command);
da.Fill(myDS);

t.Commit();
conn.Close();
}
}

That's it!. One last thing worth noting is that you have to use a transaction in order for this to work. This is necessary to prevent cursors returned by refcursor function from closing after the implicity transaction is finished (just after you do the function call).

If you have parameters in your function, assign only the function name to the CommandText property and add parameters to the NpgsqlCommand.Parameters collection as usual. Npgsql will take care of binding your parameters correctly.

Using output parameters in a query

Output parameters can be used with Npgsql. Note that Npgsql "simulates" output parameter by parsing the first result set from the execution of a query and translating it to output parameters value. This can be done in two ways: mapped or not. A mapped parsing, tries to match the column name returned by resultset into a parameter with the same name. If a match is found, only the output parameters which has a match will be updated. If a map is not found, the output parameters are updated based on the order they were added to command parameters collection. This mapping is automatic. When parsing resultset, Npgsql tries to find a match. Both Output and InputOutput parameter directions are supported.

using System;
using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();

// Send a query to backend.
NpgsqlCommand command = new NpgsqlCommand("select * from tablea where column1 = 2", conn);

// Now declare an output parameter to receive the first column of the tablea.

NpgsqlParameter firstColumn = new NpgsqlParameter("firstcolumn", NpgsqlDbType.Integer);
firstColumn.Direction = ParameterDirection.Output;

command.Parameters.Add(firstColumn);


try
{
command.ExecuteNonQuery();

// Now, the firstcolumn parameter will have the value of the first column of the resultset.
Console.WriteLine(firstColumn.Value);


}

finally
{
conn.Close();
}
}
}

Working with .NET Datasets

Npgsql lets you propogate changes to a .NET DataSet object back to the database. The example below demonstrates the insertion of a record into a DataSet, followed by a call to update the associated database:

// This method expects the following table in the backend:
//
// create table tableb(field_int2 int2, field_timestamp timestamp, field_numeric numeric);
//
//
void AddWithDataSet(NpgsqlConnection conn)
{
conn.Open();

DataSet ds = new DataSet();

NpgsqlDataAdapter da = new NpgsqlDataAdapter("select * from tableb", conn);

da.InsertCommand = new NpgsqlCommand("insert into tableb(field_int2, field_timestamp, field_numeric) " +
" values (:a, :b, :c)", conn);

da.InsertCommand.Parameters.Add(new NpgsqlParameter("a", DbType.Int16));

da.InsertCommand.Parameters.Add(new NpgsqlParameter("b", DbType.DateTime));

da.InsertCommand.Parameters.Add(new NpgsqlParameter("c", DbType.Decimal));

da.InsertCommand.Parameters[0].Direction = ParameterDirection.Input;
da.InsertCommand.Parameters[1].Direction = ParameterDirection.Input;
da.InsertCommand.Parameters[2].Direction = ParameterDirection.Input;

da.InsertCommand.Parameters[0].SourceColumn = "field_int2";
da.InsertCommand.Parameters[1].SourceColumn = "field_timestamp";
da.InsertCommand.Parameters[2].SourceColumn = "field_numeric";

da.Fill(ds);

DataTable dt = ds.Tables[0];

DataRow dr = dt.NewRow();
dr["field_int2"] = 4;
dr["field_timestamp"] = new DateTime(2003, 03, 03, 14, 0, 0);
dr["field_numeric"] = 7.3M;

dt.Rows.Add(dr);

DataSet ds2 = ds.GetChanges();

da.Update(ds2);

ds.Merge(ds2);
ds.AcceptChanges();
}

Working with strongly typed datasets

This example demonstrates the use of a strongly typed dataset generated by XSD. To start, we need an XSD file specifing the appropiate schema. You can generate this file by hand, or you can use an XSD tool to generate it for you. In order to let NpgsqlDataAdapter generate XSD, you need to suppy it with an XML file; the XML file allows the inference of an XML schema.

public void GenerateXmlFromDataSet(NpgsqlConnection conn)
{
conn.Open();


NpgsqlDataAdapter da = new NpgsqlDataAdapter("select * from tablea", conn);

DataSet ds = new DataSet();

da.Fill(ds);

ds.WriteXml("StrongDataSetFeed.xml");
}

The example code results in a file which looks similar to:




1
Random text


2
4


3
8


4
true


5
Text with ' single quote



The following command uses the file to generate XSD:

xsd StrongDataSetFeed.xml

XSD will produce an XML schema in which all types are specified as string. As a consequence, we need to change the XSD to specify the correct types, resulting in an XSD file similar to:






















Given the above file, the following command generates a strongly typed dataset:

xsd StrongDataSetFeed.xsd /dataset

This command generates a file that compiles into an assembly for the strongly typed dataset. It's used in the example below:

using System;
using Npgsql;


public class t
{
public static void Main(String[] args)
{
NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");

conn.Open();

NpgsqlDataAdapter da = new NpgsqlDataAdapter("Select * from tablea", conn);


NewDataSet n = new NewDataSet();

da.Fill(n);

foreach (NewDataSet._TableRow tr in n._Table)
{
Console.WriteLine(tr.field_serial);
}
}
}

Working with binary data and bytea datatype

This sample takes a filename as an argument, inserts its contents into a table called "tableByteA". The table contains a field named "field_bytea" of type bytea and a field named "field_serial" of type serial. Next, it retrieves the field contents and writes a new file with the suffix "database".

table schema: create table tableBytea (field_serial serial, field_bytea bytea)

using System;
using System.Data;
using Npgsql;
using System.IO;


public class t
{
public static void Main(String[] args)
{
//NpgsqlEventLog.Level = LogLevel.Debug;
//NpgsqlEventLog.LogName = "NpgsqlTests.LogFile";
NpgsqlConnection conn = new NpgsqlConnection("server=localhost;user id=npgsql_tests;password=npgsql_tests");
conn.Open();

FileStream fs = new FileStream(args[0], FileMode.Open, FileAccess.Read);

BinaryReader br = new BinaryReader(new BufferedStream(fs));

Byte[] bytes = br.ReadBytes((Int32)fs.Length);

Console.WriteLine(fs.Length);

br.Close();
fs.Close();

NpgsqlCommand command = new NpgsqlCommand("insert into tableBytea(field_bytea) values(:bytesData)", conn);

NpgsqlParameter param = new NpgsqlParameter(":bytesData", DbType.Binary);

param.Value = bytes;

command.Parameters.Add(param);
command.ExecuteNonQuery();
command = new NpgsqlCommand("select field_bytea from tableBytea where field_serial = (select max(select field_serial) from tableBytea);", conn);


Byte[] result = (Byte[])command.ExecuteScalar();
fs = new FileStream(args[0] + "database", FileMode.Create, FileAccess.Write);


BinaryWriter bw = new BinaryWriter(new BufferedStream(fs));

bw.Write(result);

bw.Flush();

fs.Close();
bw.Close();



conn.Close();

}
}

Working with large object support

This sample is nearly identical to the bytea code above. It stores the retrieved file in Postgresql, and then later removes it. As with the bytea sample, it writes a file with a "database" suffix.

using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;
using System.IO;

public class c
{
public static void Main(String[] args)
{
NpgsqlConnection newconn = new NpgsqlConnection("server=localhost;user id=npgsql_tests;password=npgsql_tests");

newcon.Open();
NpgsqlTransaction t = newcon.BeginTransaction();
LargeObjectManager lbm = new LargeObjectManager(newcon);

int noid = lbm.Create(LargeObjectManager.READWRITE);
LargeObject lo = lbm.Open(noid,LargeObjectManager.READWRITE);

FileStream fs = File.OpenRead(args[0]);

byte[] buf = new byte[fs.Length];
fs.Read(buf,0,(int)fs.Length);

lo.Write(buf);
lo.Close();
t.Commit();


t = newcon.BeginTransaction();

lo = lbm.Open(noid,LargeObjectManager.READWRITE);

FileStream fsout = File.OpenWrite(args[0] + "database");

buf = lo.Read(lo.Size());

fsout.Write(buf, 0, (int)lo.Size());
fsout.Flush();
fsout.Close();
lo.Close();
t.Commit();


DeleteLargeObject(noid);

Console.WriteLine("noid: {0}", noid);
newcon.Close();
}

public static void DeleteLargeObject(Int32 noid)
{
NpgsqlConnection conn = new NpgsqlConnection("server=localhost;user id=npgsql_tests;password=npgsql_tests");

newcon.Open();
NpgsqlTransaction t = newcon.BeginTransaction();
LargeObjectManager lbm = new LargeObjectManager(newcon);
lbm.Delete(noid);

t.Commit();

newcon.Close();

}
}

Another example, contributed by Mirek (mirek at mascort dot com dot pl), uses large object support to get an image from the database and display it in a form on the client.

using System;
using Npgsql;
using NpgsqlTypes;
using System.Drawing;
using System.IO;

//metod whos take picture oid from database

public int takeOID(int id)

{

//it's a metod whos connect to database and return picture oid

BazySQL pir = new BazySQL(Login.DaneUzera[8]);

string pytanko = String.Format("select rysunek from k_rysunki where idtowaru = " + idtowaru.ToString());

string[] wartosci = pir.OddajSelectArray(pytanko);

int liczba = int.Parse(wartosci[0].ToString());

return liczba;

}

//take a picture from database and convert to Image type

public Image pobierzRysunek(int idtowaru)

{

NpgsqlConnection Polacz = new NpgsqlConnection();

Polacz.ConnectionString = Login.DaneUzera[8].ToString(); //its metod whos return connection string

Polacz.Open();

NpgsqlTransaction t = Polacz.BeginTransaction();

LargeObjectManager lbm = new LargeObjectManager(Polacz);

LargeObject lo = lbm.Open(takeOID(idtowaru),LargeObjectManager.READWRITE); //take picture oid from metod takeOID

byte[] buf = new byte[lo.Size()];

buf = lo.Read(lo.Size());

MemoryStream ms = new MemoryStream();

ms.Write(buf,0,lo.Size());

lo.Close();

t.Commit();

Polacz.Close();

Polacz.Dispose();

Image zdjecie = Image.FromStream(ms);

return zdjecie;

}

//next I just use this metod

pictureBox1.Image = Image pobierzRysunek(1);

Retrieving last inserted id on a table with serial values

This example was contributed by Josh Cooley when answering an user question on Npgsql Forums. This code assumes you have the following table and function in your database:

 create table test_seq (field_serial serial, test_text text);

CREATE OR REPLACE FUNCTION ins_seq("varchar")
RETURNS test_seq AS
'insert into test_seq (test_text) values ($1);
select * from test_seq where test_text = $1'
LANGUAGE 'sql' VOLATILE;

And this is the code:

using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;

public class c
{
public static void Main(String[] args)
{
//NpgsqlEventLog.Level = LogLevel.Debug;
//NpgsqlEventLog.LogName = "NpgsqlTests.LogFile";
//NpgsqlEventLog.EchoMessages = true;

NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;");


using (NpgsqlDataAdapter adapter = new NpgsqlDataAdapter("select * from test_seq", conn))
{

DataTable table = new DataTable();
adapter.Fill(table);
adapter.InsertCommand = new NpgsqlCommand("ins_seq", adapter.SelectCommand.Connection);
adapter.InsertCommand.Parameters.Add("foo", NpgsqlTypes.NpgsqlDbType.Varchar, 100, "test_text");
adapter.InsertCommand.CommandType = CommandType.StoredProcedure;

DataRow row = table.NewRow();
row["test_text"] = "asdfqwert";
table.Rows.Add(row);
adapter.Update(table);

foreach (DataRow rowItem in table.Rows)
{
Console.WriteLine("key {0}, value {1}", rowItem[0], rowItem[1]);
}

Console.ReadLine();
}

}
}

Cancelling a command in progress

Npgsql is able to ask the server to cancel commands in progress. To do this, call the NpgsqlCommand's Cancel method. Note that another thread must handle the request as the main thread will be blocked waiting for command to finish. Also, the main thread will raise an exception as a result of user cancellation. (The error code is 57014.) See the following code which demonstrates the technique:

using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;
using System.Threading;


public class c
{

// This method expects the following table in the backend:
//
/* CREATE OR REPLACE FUNCTION funcwaits() returns integer as
'
declare t integer;
begin

t := 0;

while t < 1000000 loop
t := t + 1;
end loop;

return t;
end;
'
*/



static NpgsqlConnection conn = null;
static NpgsqlCommand command = null;

public static void Main(String[] args)
{
//NpgsqlEventLog.Level = LogLevel.Debug;
//NpgsqlEventLog.LogName = "NpgsqlTests.LogFile";
//NpgsqlEventLog.EchoMessages = true;

try
{

conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlCommand d = new NpgsqlCommand();

Thread t = new Thread(new ThreadStart(CancelRequest));


command = new NpgsqlCommand("select * from funcwaits()", conn);

Console.WriteLine("Cancelling command...");
t.Start();

Console.WriteLine(command.ExecuteScalar());
conn.Close();
}
catch(NpgsqlException e)
{
if (e.Code == "57014")
Console.WriteLine("Command was cancelled");
}
}

public static void CancelRequest()
{
command.Cancel();
Console.WriteLine("command cancelled");
}
}

Working with Notifications

Npgsql allows user to receive events based on notifications sent by a server. There are two ways to receive notications with Npgsql: asynchronously or synchronously. Synchronous notification is only supported by Npgsql 1.0 and above.

Asynchronous notifications

This is the default notification mechanism used in Npgsql. It is called asynchronous because Npgsql doesn't receive a notification upon execution of the event which generated it on the server. Npgsql receives the notification on the next instance of client interaction with the server. This interaction actually occurs when Npgsql sends a subsequent command to the server- which might consist of a few seconds to many hours later. With this in mind, most users will need to actively poll the server in order to recieve notifications in a timely matter. One approach involves polling via empty commands such as ";"

Synchronous notifications

Starting with Npgsql 1.0, there is support for synchronous notifications. When working in this mode, Npgsql is able to receive a notificaton upon its instantiation and deliver it to client. All this is done without any additional interaction between the client and server (as described above). The code to receive the notification is the same for both modes:
using System;
using System.Data;
using Npgsql;
using NpgsqlTypes;
using System.Threading;


public class c
{

public static void Main(String[] args)
{

conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("listen notifytest;", conn);
command.ExecuteNonQuery();

conn.Notification += new NotificationEventHandler(NotificationSupportHelper);


command = new NpgsqlCommand("notify notifytest;", _conn);
command.ExecuteNonQuery();

Console.ReadLine(); // To prevent program termination before notification is handled.
}

private void NotificationSupportHelper(Object sender, NpgsqlNotificationEventArgs args)
{
// process notification here.
}
}

This code registers to listen for a notification and raises the notification. It will be delivered to the NotificationSupportHelper method.

Fast bulk data copy into a table

Batched inserts can be time consuming with large amounts of data. PostgreSQL provides an alternative, much faster method of importing raw data. Its syntax and input format options are already explained in PostgreSQL COPY documentation. To copy data from client-side you need to use the FROM STDIN option.

When feeding straight to COPY IN operation, you have to provide data using the same encoding as the server uses.

The simplest method is to provide a readable file handle to the CopyIn operation constructor. Upon start, the copy in operation will read whole contents of given stream and push them to the server. (Refer to COPY statement documentation for different input formats!)

  1. See to it that you set SyncNotification=true in your database connection string. This is to catch any anomaly reports during import to prevent deadlock between client and server network buffers.
  2. Create NpgsqCopyIn object with a stream providing the data to input into database
  3. Call Start() to initiate copy operation. The operation is completed immediately.
  4. If Start() throws an exception, call NpgsqlCopyIn.Cancel() to cancel an ongoing operation and clear connection back to Ready For Query state. Otherwise your connection may stay in copy mode, unusable for anything else.
using System;
using System.Data;
using Npgsql;

public class CopyInExample
{

public static void Main(String[] args)
{

conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;SyncNotification=true;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("COPY myCopyTestTable FROM STDIN", conn);
NpgsqlCopyIn cin = new NpgsqlCopyIn( command, conn, Console.OpenStandardInput() ); // expecting input in server encoding!
try
{
cin.Start();
}
catch(Exception e)
{
try
{
cin.Cancel("Undo copy");
}
catch(NpgsqlException e2)
{
// we should get an error in response to our cancel request:
if( ! (""+e2).Contains("Undo copy") )
{
throw new Exception("Failed to cancel copy: " + e2 + " upon failure: " + e);
}
}
throw e;
}
}
}

If you wish to provide the data from inside your application, you can use a normal writable stream:

  1. See to it that you set SyncNotification=true in your database connection string. This is to catch any anomaly reports during import to prevent deadlock between client and server network buffers.
  2. Create NpgsqCopyIn object without specifying a stream
  3. Call Start() to initiate copy operation
  4. Write your data in correct format and encoding into NpgsqlCopyIn.CopyStream
  5. During the operation the connection can not be used for anything else.
  6. Call CopyStream.Close() or NpgsqlCopyIn.End() to complete writing
  7. To cancel an ongoing operation and clear connection back to Ready For Query state call NpgsqlCopyIn.Cancel().
  8. Upon failure call NpgsqlCopyIn.Cancel() to cancel an ongoing operation and clear connection back to Ready For Query state. Otherwise your connection may stay in copy mode, unusable for anything else.
using System;
using System.Data;
using Npgsql;

public class CopyInExample
{

public static void Main(String[] args)
{

conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;SyncNotification=true;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("COPY myCopyTestTable FROM STDIN", conn);
NpgsqlCopyIn cin = new NpgsqlCopyIn( command, conn );

Stream inStream = Console.OpenStandardInput();
Encoding inEncoding = System.Text.Encoding.ASCII;
Encoding serverEncoding = System.Text.Encoding.BigEndianUnicode; // example assumption

try
{
cin.Start();
Stream copyInStream = cin.CopyStream;
byte[] buf = new byte[9];
int i;
while( (i = inStream.Read(buf,0,buf.Length)) > 0 )
{
buf = System.Text.Convert( inEncoding, serverEncoding, buf, 0, i );
copyInStream.Write( buf, 0, i );
}
copyInStream.Close(); // or cin.End(), if you wish
}
catch(Exception e)
{
try
{
cin.Cancel("Undo copy"); // Sends CopyFail to server
}
catch(Exception e2)
{
// we should get an error in response to our cancel request:
if( ! (""+e2).Contains("Undo copy") )
{
throw new Exception("Failed to cancel copy: " + e2 + " upon failure: " + e);
}
}
throw e;
}
}
}

Fast bulk data copy from a table or select

Even trivial selections of large data sets can become time consuming when network is the bottleneck. PostgreSQL provides an alternative, much faster method of exporting raw data. Its syntax and input format options are already explained in PostgreSQL COPY documentation. To copy data to client-side you need to use the TO STDOUT option.

COPY OUT provides data in server-side encoding.

The simplest method is to provide a writable stream to the CopyOut operation constructor. Upon start, the operation will then write everything coming down from server right into that sink. (Refer to COPY statement documentation for different output formats!)

  1. Create NpgsqCopyOut object with a stream for writing the output received from database
  2. Call Start() to initiate copy operation. All requested data is written to specified stream immediately.
  3. An ongoing operation may be cancelled by calling CopyStream.Close() or NpgsqlCopyIn.End()
  4. Upon failure your connection becomes unusable unless you cancel the copy operation.
  5. If Start() throws an exception, cancel the ongoing operation. Otherwise your connection may stay in copy mode, unusable for anything else.
using System;
using System.Data;
using Npgsql;

public class CopyOutExample
{

public static void Main(String[] args)
{

conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("COPY myCopyTestTable TO STDOUT", conn);
NpgsqlCopyOut cout = new NpgsqlCopyOut( command, conn, Console.OpenStandardOutput() );
try
{
cout.Start();
}
catch(Exception e)
{
try
{
cout.End(); // return connection to Ready for Query state
}
catch(Exception e2)
{
throw new Exception("Failed to revive from copy: " + e2 + " upon failure: " + e);
}
throw e;
}
}
}

You can read COPY OUT data normally from a stream:

  1. Create NpgsqCopyOut object without specifying a stream
  2. Call Start() to initiate copy operation
  3. Read data in server-side encoding from NpgsqlCopyOut.CopyStream or row by row from NpgsqlCopyOut.Read
  4. During the operation the connection may not be used for anything else.
  5. All data has been received when no more comes out (CopyStream.Read(...) returns zero; NpgsqlCopyOut.Read a null pointer)
  6. The operation completes automatically upon end
  7. An ongoing operation may be cancelled by calling CopyStream.Close() or NpgsqlCopyIn.End()
  8. Upon failure cancel the ongoing operation. Otherwise your connection may stay in copy mode, unusable for anything else.
using System;
using System.Data;
using Npgsql;

public class CopyOutExample
{

public static void Main(String[] args)
{
conn = new NpgsqlConnection("Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;");
conn.Open();

NpgsqlCommand command = new NpgsqlCommand("COPY myCopyTestTable TO STDOUT", conn);
NpgsqlCopyOut cout = new NpgsqlCopyOut( command, conn );

Stream outStream = Console.OpenStandardOutput();
Encoding serverEncoding = System.Text.Encoding.BigEndianUnicode; // example assumption
Encoding outEncoding = System.Text.Encoding.ASCII;

try
{
cout.Start();
Stream copyOutStream = cout.CopyStream;
byte[] buf = cout.Read; // complete first row
Console.Out.Write(buf,0,buf.Length);
int i;
while( (i = copyOutStream.Read(buf,0,buf.Length)) > 0 )
{
buf = System.Text.Convert( serverEncoding, outEncoding, buf, 0, i );
Console.Out.Write( buf, 0, i );
}
copyOutStream.Close(); // or cout.End(), if you wish
}
catch(Exception e)
{
try
{
cout.End(); // return connection to Ready for Query state
}
catch(Exception e2)
{
throw new Exception("Failed to revive from copy: " + e2 + " upon failure: " + e);
}
throw e;
}
}
}

System.Transactions Support

Thanks Josh Cooley, Npgsql has added initial support for System.Transactions. This code is still in very early stage, so if you have any problems with it, please let us know so we can fix it as soon as possible.

In order to use it, you have to put the following in your connection string:

 Enlist=true

False is currently the default, but we will likely make enlist=true the default once System.Transactions support stabilizes.

Here is a sample code which uses System.Transactions support:

using System;
using System.Data;
using Npgsql;
using System.Transactions;

public class TransactionExample
{

public static void Main(String[] args)
{

string connectionString = "Server=127.0.0.1;User id=npgsql_tests;password=npgsql_tests;Enlist=true";
using (TransactionScope tx = new TransactionScope())
{
using (NpgsqlConnection connection = new
NpgsqlConnection(connectionString))
{
connection.Open();
using (NpgsqlCommand command = new
NpgsqlCommand("insert into tablea (cola) values ('b')", connection))
{
command.ExecuteNonQuery();
}
using (NpgsqlConnection connection2 = new
NpgsqlConnection(connectionString))
{
connection2.Open();
using (NpgsqlCommand command = new
NpgsqlCommand("insert into tablea (colb) values ('c')", connection2))
{
command.ExecuteNonQuery();
}
}
}
tx.Complete();
}
}
}

3.1 Using Npgsql Logging support

Sometimes it's necessary to trace Npgsql's behaviour to track errors. Npgsql can log messages to a specified file, to the console, or to both.

There are three levels of logging:

  • None
  • Normal
  • Debug

The following NpgsqlEventLog static properties may also be specified:

  • Level - Can be one of the LogLevel enum values: None, Normal, Debug.
  • LogName - Full path of the file where to log into.
  • EchoMessages - Log to the console.

The example below shows you how to log data to the console and to a file using level "Debug":

using System.Data;
using Npgsql;

public static class NpgsqlUserManual
{
public static void Main(String[] args)
{
// Enable logging.
NpgsqlEventLog.Level = LogLevel.Debug;
NpgsqlEventLog.LogName = "NpgsqlTests.LogFile";
NpgsqlEventLog.EchoMessages = true;

NpgsqlConnection conn = new NpgsqlConnection("Server=127.0.0.1;Port=5432;User Id=joe;Password=secret;Database=joedata;");
conn.Open();
conn.Close();
}
}

Running this code gives the following output:

Set NpgsqlEventLog.EchoMessages = True
Entering NpgsqlConnection.NpgsqlConnection()
Entering NpgsqlConnection.ParseConnectionString()
Connection string option: DATABASE = joedata
Connection string option: SERVER = 127.0.0.1
Connection string option: USER ID = joe
Connection string option: PASSWORD = secret
Entering NpgsqlConnection.Open()
Connected to: 127.0.0.1:5432
Entering NpgsqlConnection.WritestartupPacket()
Entering NpgsqlStartupPacket.NpgsqlStartupPacket()
Entering NpgsqlStartupPacket.WriteToStream()
Entering PGUtil.WriteLimString()
Entering PGUtil.WriteLimString()
Entering PGUtil.WriteLimString()
Entering PGUtil.WriteLimString()
Entering PGUtil.WriteLimString()
Entering NpgsqlConnection.HandleStartupPacketResponse()
AuthenticationRequest message from Server
Server requested cleartext password authentication.
Entering NpgsqlPasswordPacket.NpgsqlPasswordPacket()
Entering NpgsqlPasswordPacket.WriteToStream()
Entering PGUtil.WriteString()
Listening for next message
AuthenticationRequest message from Server
Listening for next message
BackendKeyData message from Server
Entering NpgsqlBackEndKeyData.ReadFromStream()
Got ProcessID. Value: 3116
Got SecretKey. Value: -132883070
Listening for next message
ReadyForQuery message from Server
Listening for next message
Connection completed
Entering NpgsqlConnection.Close()

I used the "Debug" level to show that a lot of information can be obtained. Of course, the "Normal" level is less verbose. (This data was written to file NpgsqlTests.LogFile.)

3.2 Npgsql design time support - VS.Net support

Npgsql 0.6 and higher provide initial design time support. This means that you can drag and drop a NpgsqlConnection in the Forms Designer of Visual Studio .NET (just like with SqlConnections or OleDbConnections).
In addition, a dialog is available for easily editing and validating the ConnectionString.

To do so you must:

  1. Install Npgsql.dll into the GAC
  2. Add a new Registry-Key below 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\AssemblyFolders' and set its default value to the path of your Npgsql.dll
  3. Open Visual Studio .NET
  4. Right-click the "Data" tab in the toolbox
  5. Click "Add/Remove Element"
  6. On the .Net tab, select NpgsqlConnection
For VS.Net 2005 you have to "Add a registry key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727\AssemblyFoldersEx with whatever name you like ( I named mine PostgreSQL ) with a default value of the directory ( trailing backslash ) where the assembly resides. " Thanks Edward Diener for tip.

As result you will have an icon named NpgsqlConnection in the "Data" tab of the toolbox.

3.3 ConnectionPool considerations

Npgsql will clear all connections from the pool whenever it finds any problems with a connection. This will allow easy recovery from any instability problems which might occur. Although this strategy may not have the best performance implications, it will ensure that the pool remains stay consistent when problems arise. Two methods to clear the pools are available through NpgsqlConnection: ClearPool and ClearAllPools. You can use them to clear the pool manually.

4. Current Npgsql Status

Supported data types

Npgsql supports the following data types:

Postgresql Type NpgsqlDbType System.DbType Enum .Net System Type
int8 Bigint Int64 Int64
bool Boolean Boolean Boolean
Box, Circle, Line, LSeg, Path, Point, Polygon Box, Circle, Line, LSeg, Path, Point, Polygon Object Object
bytea Bytea Binary Byte[]
date Date Date DateTime
float8 Double Double Double
int4 Integer Int32 Int32
money Money Decimal Decimal
numeric Numeric Decimal Decimal
float4 Real Single Single
int2 Smallint Int16 Int16
text Text String String
time, timetz Time Time DateTime
timestamp Timestamp DateTime DateTime
timestamptz TimestampTZ DateTime DateTime
varchar Varchar String String
inet Inet Object NpgsqlInet, IPAddress
(there is an implicity cast operator to convert NpgsqlInet objects into IPAddress if you need to use IPAddress and have only NpgsqlInet)
bit Bit Boolean Boolean, Int32
(If you use an Int32 value, odd values will be translated to bit 1 and even values to bit 0)
uuid Uuid Guid Guid

Features

  • You can send select, insert, delete queries
  • You can call functions
  • You can get resultset from functions
  • You can use parameters in your queries. Input, Output and InputOuput parameters are supported
  • Parameter names have ":" markers or "@" markers to easy migration of code. :parameter -or- @parameter
  • Support for transactions

Add the tab between strings

If u want to add the tab between the strings use Controlchars.tab()

For example :
Dim str as string
str = "siva" + controlchars.tab() + "kumar"
console.writeline(str)


o/p : siva kumar

Friday, January 18, 2008

Linux - Memory Leakage

In Linux the valgrind tool help us to detect the memory leakage in our coding.

For Example
if your application exec is named as myexec, then run the command as below

valgrind --tool=memcheck --leak-check=yes --num-callers=25 ./myexec

Note :- when your running the exec with valgrind tool run the exec with ./ (dot slash).

when your application needs to pass arguments with the exec run tool with argument

valgrind --tool=memcheck --leak-check=yes --num-callers=25 ./myexec -ORBInitRef NameServic=corbaloc:iiop:localhost/NameService


Memcheck performs a range of memory-checking functions,including detecting accesses to uninitialized memory, misuse of allocated memory (double frees, access after free, etc.) and detecting memory leaks.

Note : use the latest tool version to get the best performance.

Internet Sharing Using Squid

Internet Sharing in linux (Squid)

Squid’s main configuration file is in /etc/squid/squid.conf.
Edit the file
Open /etc/squid/squid.conf
You will need to either find and uncomment entries, or modify existing uncommented lines in the squid configuration file. Use text editor or a text find to locate these lines: visible_hostname machine-name or IPhttp_port 3128cache_dir ufs /var/spool/squid 1000 16 256cache_access_log /var/log/squid/access.log
In the acl section near the bottom add:acl intranet 192.168.10.0/24 à Allow all the machines to access.http_access allow lcsintranet.com (lcsintranet.com – hostname)
visible_hostname - Create this entry and set this to the hostname of the machine. To find the hostname, use the command hostname. Not entering a value may cause squid to fail as it may not be able to automatically determine the fully qualified hostname of your machine.
http_port 3128 - Uncomment this line but there is no need to edit it unless you want to change the default port for http connections.
cache_dir ufs /var/spool/squid 1000 15 256 - Uncomment this line. You may want to append a zero to the value 100 which will make the cache size 1000MB instead of 100MB. The last two values stand for the default folder depth the cache will create on the top and subdirectories respectively. They do not need modification.
cache_access_log - Uncomment this line. This is where all requests to the proxy server will get logged.
acl intranet 192.168.10.0/24 - This entry needs to be added. It should correspond to whatever your local network range is.
http_access allow intranet - This allows the acl named intranet to use the proxy server. Make sure to put allow directives above the last ‘http_access deny all’ entry, as it will overide any allow directives below it.

To allow a single address to access a specific URL
This example allows only the special_client to access the special_url. Any other client that tries to access the special_url is denied. acl special_client src 192.168.10.3acl special_url url_regex ^http://www.squid-cache.org/Doc/FAQ/$http_access allow special_client special_urlhttp_access deny special_url To allow a particular address to access a list of URL acl special_client src 192.168.10.3acl special_client src “/etc/squid/ip.txt” à (Make a file ip.txt and add the to access the particular URL)acl lcssite url_regex –i “/etc/squid/site.txt” à (Make a file site.txt add the URL)

Turning on squid
Start the service:service squid start
Verify that squid is running :service squid status

Configuring the clients
If you are using Firefox or Mozilla you will need to add the proxy server as follows:
Go to Preferences>Network>Settings
Add the name of your new proxy server and port 3128 to the http proxy field

Linux Volume Control Settings

Th amixer command is used to adjsut the volume of sound card.

Linux Disk Copy

HardDisk Copy In Linux
(Disk to Disk Copy)

Connect two hard disk in the mother board.
Boot the system with the data hard disk.
Run the following command to know the hard disk name,
# fdisk -l (shows booted H/D)
# ls /dev/ (shows the other H/D)
Let the data containing hardisk be HDA and the data in which to be copied be HDB.
Now execute the below command to copy the hard disk.

# dd if=/dev/hda of=/dev/hdb bs=1024k

Now the data's with start to copy.

Postgres Installation error in Xp Embedded

Postgres installation error in xp embedded

Failed to run initdb:1
Solution : Add null device driver while creating a xpembedded image.

Secondary service logon failure

Solution : Add runas service while creating a xpembedded image.

Linux Process Memory Usage

The following shell script is used to monitor the memory usage of a process.
Save the following script in a file (for ex, memusage.sh) and run it with the process name you want to monitor.

for ex, ./memusage.sh myapp
Now the script log the mem usage in memusage.csv file for every 2 secs. You can change the time period by change the PERIOD value in the script.

#!/bin/sh
#GetmemUsageModified2
USAGE="Usage: $0 processName"
if [ $# -ne 1 ]; then
echo $USAGE
exit 1
fi
# In case the monitored process has not yet started
# keep searching until its PID is found
PROCESS_PID=""
while :
do
PROCESS_PID=`/sbin/pidof $1`
if [ "$PROCESS_PID.X" != ".X" ]; then
break
fi
done
LOG_FILE="memusage.csv"
echo "ElapsedTime,VmSize,VmRSS" > $LOG_FILE
ELAPSED_TIME=`date`
PERIOD=2 # seconds
while :
do
if [ -d /proc/$PROCESS_PID ] ; then
VM_SIZE=`awk '/VmSize/ {print $2}' < /proc/$PROCESS_PID/status`
if [ "$VM_SIZE.X" = ".X" ]; then
continue
fi
VM_RSS=`awk '/VmRSS/ {print $2}' < /proc/$PROCESS_PID/status`
if [ "$VM_RSS.X" = ".X" ]; then
continue
fi
echo "$ELAPSED_TIME,$VM_SIZE,$VM_RSS" >> $LOG_FILE
sleep $PERIOD
VM_SIZE=""
VM_RSS=""
ELAPSED_TIME=`date +%H:%M:%S:%N`
else
echo "$1 is no longer a running process"
exit 0
fi
done